Easiest, Best and Most Effective Lighting Upgrades for ANY car!

Car lighting is an essential requirement for driving your motor vehicle at night or for road-driving safety.

With how popular and advanced aftermarket LED has become today, who’s to know what lights you should be upgrading first?  If you have a burnt out incandescent bulb then of course that would be the first to go, but for those seeking brilliance and/or performance lighting, what lighting mods should you do first?

In this article, we discuss the most effective upgrades that will provide night and day difference and improve driving experience, safety, driving noticeability and visibility.  This revolves mainly around cost effective upgrades to the simplest installations that require minimal labor and provide a major difference from what was in there before.  There is no given order as to what should be done first, however, these would be the better ones to try out for first LED install before deciding on converting the entire vehicle over to LED.

 

Maps & Dome Lights

Easy best lighting 1

JDM Astar patented T10 PX 3-SMD (US Patent D814,666) LED bulbs installed to the map and dome lights of a 2016 Honda Accord LX

This is the most cost effective upgrade.  Most vehicles come included with cab lighting and will usually feature 2 lamps that sit on the roof of the vehicles cab and typically by the driver and passenger sides.  Picture yourself holding a map and whatever lamp throws light to that map would be the map. Map lights commonly use a T10 wedge type bulb (ex. 194, 168, W5W, etc) or festoon bulbs (ex. 578, DE3175, etc) and typically run $8-$15 for a pair.  There are also 10pks available that will upgrade both maps and even have spare bulbs for other lamps in the interior that run the same sized bulb.  Most vehicles will use a 5W incandescent that is limited to an average of 50-70 lumens per bulb whereas interior T10 LED bulbs produces an average of 75lm-220lm.

Easy best lighting 2

Side by side comparison between DE3175 5W incandescent versus 31mm 3020 6-SMD CAN bus LEDs on the map lights of a later model Toyota.

Dome lighting is very common on sedans, coupes, sport utility vehicles and trucks as well as other commercial vehicles.  Dome lighting provides light coverage for a majority of the cab or interior of the vehicle and usually have 1 lamp.  Like map lights, dome lights will use an average 5W incandescent bulb.  An aftermarket festoon LED can produce results as high as 200lm making it the only necessary lamp to turn on for your interior as well as the most cost effective upgrade that anybody can do.

 

Replacing an interior map or dome light is simple and anybody can do it.  Most vehicles do not require special tools and you can upgrade your interiors main lamps for as a low as $30!  Interior lamps are the most effective and affordable upgrades that can be made for any vehicle.

 

Backup Lamps

Easy best lighting 3

2016 Honda Accord LX upgraded backup lamps with patented design 921 GX-3020 18-SMD CAN bus LED bulbs (US Patent D815,762)

Backup lights are essential for safety when in reverse and as important as safety, the brilliance and visibility is also important.  Most vehicle manufacturers will use a T20 (ex. 7443), T25, (ex. 3157) or a smaller T15 (ex. 921) wedge type bulb to provide light while reversing your vehicle.  Most backup lamps have an average wattage of 20W-27W giving you a luminosity that ranges from 150lm-400lm and usually have a dull warm white look.

With aftermarket LED, you can play with your brilliance.  On the market, most backup LEDs average from 500lm-1000lm!  Some unique options such as our patent 921 3020 18-SMD LEDs will even change the pattern and light disbursement providing advantages such as wider beam pattern, and/or further reach making reversing your car that much easier!

Easy best lighting 4

Raw image of a side by side comparison between our patented 921 GX-3020 18-SMD LEDs versus the factory 921 15W incandescent lamp.

For safety, it is not question as to why every car should have an upgraded backup light LED installed.

 

Headlights

Easy best lighting 5

When LED first made its way into the auto industry, the options were limited but as new and innovative designs were released, you now have options to play with and are capable of offering better results over other aftermarket options such as High Intensity Discharge bulb.

Most vehicles run either a single beam bulb or a dual beam bulb to provide lighting for low beams or high beams.  Brand new single halogen beam bulbs have an average of 50W-55W providing about 1000lm-1400lm where as a dual beam bulb runs at 55W/65W (Lows/Highs) providing a similar rating for the low beam filament and increasing the intensity as the high beam filament engages.

Keep in mind, older technologies such as halogen or incandescent burn the filament inside the bulb causing wear through time and usage resulting in loss of light.  Your headlights will not appear the same in light intensity after 1 year of driving the vehicle.  For aftermarket LED headlight, however, it’s an entirely different story!

Most of our LED headlights provide an average luminosity of 3000lm-4000lm that practically doubles if not triples the output of the factory lighting.  The best thing about using JDM ASTAR headlights is that there are options not just for the car but options for the driver.  There is a solution for both car and driver regardless of your budget so if you ever have any questions and not too sure what you would like to upgrade first, contact the go to guys of LED lighting.  Hit up JDM ASTAR and they can guide you to answer any questions about car lighting and help you find the best lighting solution for your car.

JDM Astar

Lighting up your world….one car at a time!

-JDM ASTAR Team

Easy best lighting 6

 

Innovating Heat Sink Cooling with 6S Series Headlights

We are at it again with yet another innovative design for aftermarket LED headlamp bulbs.  JDM ASTAR has introduced another heat sink type headlight to join others like our 4S and 8th Generation Headlights.

DSC_6506.JPG

The 6S headlights use a redesigned heat sink that offers improved and larger surface area for heat dissipation.  Rather than using standard aluminum, the 6S are built with the same aviation grade 6063 aluminum that are found on a variety of our existing LEDs today such as our 8th Generation Headlights or smaller bulbs like 3030 14-SMD Series LED bulbs.  This means that there will be a substantial increase in how much heat is radiated from the light source, through the aluminum body, and exhaust through the heat sink in order make cooling even faster.

So what is all the hype about with this new cooling fin heat sink that reminds us all of chopper ready to take off?

DSC_6502

Well, it’s not the traditional bulky unit that earlier designs offer.  We have been there before and have seen many cases where a fan or heat sink is a bit too wide to fit, or there is not enough depth to provide fitment for the cooling mechanism thus creating an even bigger problem.  Aside from the labor involved, you will also have to ship something back and we all know how much of a drag this can be.  When we buy stuff off Amazon, it better be right!

DSC_6499.JPG

The 6S headlights offer a bendable/mold-able heat sink.  The cooling fins use 6063 aluminum and are designed to be adjusted to cater to the clearance on your vehicles housing or area as well as allow fitment if the LED lamp.  The cooling fins will get extend to get air flow to improve radiation of heat.  This means the diodes will be able operate for a longer period of time, as well as provide thousands and thousands of hours of operating life.  So, if the 8th Gens were simply too big to fit, no worries, the 6S headlights still got you covered!

DSC_6507

Aside from cooling, the 6S Headlights also offer high thermal resistant diodes that are also found on our existing designs.  The lamp uses a total of 8 CSP (Chip Scale Package) surface mount diodes with 4 on each side.  For those dual headlamp bulbs, they will use 16 CSP diodes with 8 being dedicated to the low beam function and 8 for the high beams.  With CSP diodes as the light source, you can expect things to be lit!  That is an understatement.  Combined with an internal smart driven IC module, the 6S Headlights provide a whomping 4000 lumens per bulb competing with that of our 8th Gens!

DSC_6477

But wait…there is still more!

light pattern 4

Ability to adjust an aftermarket LED headlight today is almost a certain need with how headlamp housings are being manufactured on vehicle housings today especially with aftermarket!  Some include projectors and others are reflectors.  The 6S headlights, once again, have got you covered!  By loosening the set screw that is by the collar of the LED lamp, it will allow you to free up the bulb and clock the direction of the light sources.  Focus, light concentration, and beam pattern will all be able to adjust through rotation of the bulb.  Once you hit that ‘sweet spot’, mark your LEDs and repeat the same steps with the opposite side and voila!  You will have a beam pattern that is the same, if not similar, to the factory halogen headlamp bulbs.  If you are not sure which way to direct the diodes, check out our blog article titled “Which way should the chips face on your LED headlights?” There you will get all details needed on the suggested bulb orientation.

DSC_6490

So if you ever dealt with the headache of fitting the bulky fan or a large heat sink of your new aftermarket LEDs, consider the 6S headlights so you can bend that heat sink around and allow the bulb to easily adapt and avoid any modifications to the housing.

 

With the many fan style LED headlights cluttering up marketplaces like Amazon, eBay(and now Wish!), it is surprise if the 6S headlights sit right up next to the 8th Gens as one of the leading designs in aftermarket LED lighting auto industry!

6S

Stop by JDMASTAR.COM and pick up your 6S headlights today and remember….

 

“LED JDM Astar light your way!”

Headlights that fit your budget….Welcome the G4 series headlights!

g4 2.jpgUpgrading to aftermarket LED lighting on your car can come off as a bit of a concern for some.  It can certainly look intimidating, at first, especially for those that may not have the experience or tools to work on their cars.

When automotive LED made its way into the industry, costs very high and as the market began to grow, competition went up and so many brands or sellers began to offer the actual value of the product they are selling and in order to continue offering such a competitive price, they must take short cuts on quality in order to meet the demand.

This exposed the LED market and eventually gave aftermarket LEDs a bad rep.  Nowadays, any time you see an inexpensive LED headlight option on Amazon, you are very cautious about buying yet alone installing them to your vehicle.

JDM Astar is here to help address that concern for those worried about short cuts on quality or risking a bulb failure that leads to hefty repairs on your cars.  Short cuts or low quality is just not part of what we do.  JDM Astar innovates and we WILL continue to innovate in order to create a foundation of what an aftermarket LED brand should represent.

With competition growing online, we have released a budget-friendly option that will provide quality, reliability, and give you the results you long for and need.  JDM has introduced the G4 headlights to their lineup of replacement headlights.

DSC_3541.jpg

The G4 series headlights sets the foundation for starter LED headlight kits. They offer aviation grade aluminum that increases density and allows more heat to radiate through the body of the bulb thus increasing how fast the diodes cool down.  Combined with a high velocity fan that clocks at 1200RPM, you will have an LED lamp that will sustain itself without any concern of overheating the diodes or damaging the driver’s circuit.  With a reduced load draw, compared to most low end headlights from foreign or unknown brands, you will achieve higher efficiency thus minimizing how much heat is generated by the diodes.

p4.jpg

Now of course, cooling mechanism is one of the factors that ensures your LEDs operate long but another factor is the light source.  The light source is key as we have come across many sources that claim to carry genuine diodes from branded manufacturers, but when you check the facts, you realize that they are falsely advertising what they use on there products. If don’t believe us, look up the cheapest LED headlight and check the light source manufactures lineup of diodes they offer. You’d be surprise what you will find with just a little bit of research!

A good example would be claiming your lamp is using CREE chips.  CREE is a manufacturer in the US and there costs for parts are not exactly competitive so this would reflect on the cost of the LED lamp you are buying and is typically combined with high grade components such as heat sinks, and Smart IC Drivers(whether external or internal).  Remember, if you hear a popular brand is being used as the light source with your LEDs, but costs are a bit too low, then be cautious and possibly steer away from that as you certainly do not want to experience the headache it may cause yet alone the risk of damaging your vehicles housing and/or wiring.

G4 3.jpg

The G4 headlights JDM Astar offers use customized type diodes and is exclusive from JDM Astar.  We are proud of this design and we call these diodes AEC chips which are a replication of what we use on our 8th Generation headlights, the Luxeon ZES chips.  Think of our AEC chips as a JDM brand version of ZES.  High quality, and value that fits the budget!  They offer high thermal resistance, low wattage consumption, and high load capacity all with a strong intensity rating of 4,000 lumens per lamp and lux readings averaging 4,150(@ 1 meter).

Next time you are on the market for your starter LED headlight kit, reach out to us!  We can guide you and find the perfect LED headlight that will surpass expectations all while saving you money so you can upgrade even more lights on your car!

JDM ASTAR….lighting up your world, one car at a time!

G4-1.jpg